Yes,we learned that we can take mobile phone camera modules from
almost all mobile phones to inteface them with our advanced hobby
electronics projects just as with any other standard add-on modules.
Since this calls for an appropriate microcontroller, it is better to use
Arduino or Raspberry Pi microcontroller as a utile platform.
Raspberry Pi camera
Recently I’ve received a Raspberry Pi camera board. The camera, comes with a ribbon cable already attached to it,is a small size (25mm x 20mm x 9mm) board where a fixed focus 5MP camera module is attached. Part number of the camera module (from OmniVision) is OV5647. At the heart of the OV5647 camera module is a 1/4” color CMOS QSXGA (5 megapixel) image sensor with OmniBSI ™ technology. This Raspberry Pi camera module can be used to take high definition video, as well as stills photographs. It is easy to use for novices, but has plenty to offer advanced users looking to expand the knowledge.
Raspberry PI comes with two first-rate connectors on board. One is
between Ethernet and HDMI, and the other is near GPIO. The one closer to
Ethernet connector is Camera Serial Interface (CSI ). This CSI is
directly connected to the Raspberry Pi GPU which can process images
without ARM intervention.
While connecting the camera module to the CSI port (located behind
the Ethernet port) of the Raspberry Pi board,ensure that camera cable is
inserted in right way, ie the blue strip in the flexible cable is
towards the Ethernet (LAN) port. Once you are connected,enable the
camera software, test the camera and try using it with Bash or Python.
As I am a newbie in the Raspberry Pi world, I haven’t drudged enough
into all features and capabilities of my borrowed Raspberry Pi (and the
camera module). If you want to leap into the future of amazing
possibilities, have a look at the documentation: http://www.raspberrypi.org/help/camera-module-setup/
The Raspberry Pi camera board transfers data through an extremely fast camera serial interface (CSI-2) bus directly to the system-on-chip (SoC) processor. It does this through a 15-pin ribbon cable, also known as flexible flat cable (FFC), and connects to the surface mount ZIF 15 socket in the Raspberry Pi board. As you may noted, the camera module on this official Raspberry Pi camera board is identical to the camera modules (ccd imagers) found in many mobile phones.
Luckily, most of the mobile phone cameras are not only MIPI compliant but also CSI compliant (see the first part of this article). The 15-pin Raspberry Pi CSI interface connector pinout is also included here to help you to keep proceed with your tinkering ideas. Note that, in Raspberry Pi, there are two flexible Flat Cable (FFC) connectors (S2 & S5). S2, near to the micro USB connector, is the Display Serial Interface (DSI). It allows low-level interfacing with LCDs and other displays with Raspberry Pi. It is a 15-pin surface mounted flexible flat connector, providing two data lanes, one clock lane, 3.3V and GND. S5, located between LAN and HDMI connector is the MIPI Camera Serial Interface 2 (CSI-2) connector for camera modules. It is a 15-pin surface mounted flat flexible connector, providing two data lines, one clock lane, bidirectional control interface compatible with I2C, 3.3V and GND. The data transmission interface in CSI is unidirectional differential serial interface with data and clock signals (the physical layer of this interface is the MIPI Alliance Standard for DPHY).
Arduino camera
Adding a camera to your Arduino UNO is not very difficult, because ArduCAM ™ Shield is infront of you. You can find a good tutorial on ArduCAM here: http://www.arducam.com/tutorial/. This tutorial will demonstrate how to use the ArduCAM shield on Arduino UNO board, aim the point and press a snapshot button you will get a BMP picture saved on the SD/TF card!
ArduCAM shield hardware integrates all the necessary components to interface with camera modules. User only need a extra support camera modules and a TF/SD card to start image capture. The ArduCAM shield includes a ArduChip which handle complex timing between MCU and LCD, Camera, FIFO. It exports a standard SPI serial interface and can be interfaced with wide range of microcontrollers. Further, ArduCAM shield includes two sets of pin out, identical in function. One is Arduino standard, it can be well mate with standard Arduino boards like UNO, MEGA2560, Leonardo and DUE etc. The other one is alternative port which can be connect to any platform like Raspberry Pi. After the great success of ArduCAM shield Rev.B, the ArduCAM team now released a more powerful ArduCAM shield Rev.C with amazing new features. This revision supports camera modules including OV7660, OV7670, OV7675, OV7725, OV2640, OV3640, OV5642 and MT9D111.
Did You Know? CMOS image sensor interface divided
into two classes, one is DVP (Digital Video Port) interface, the other
is MIPI Mobile Industry Processor Interface. The main difference between
DVP and MIPI is that DVP is parallel interface and the MIPI interface
is high speed differential serial interface. MIPI interface provide
higher data band width than DVP interface and support higher resolution
and frame rate.
Image sensor is usually cheap and you can buy them for as little as $5.00 on eBay. However, when it turn into a “microcontroller-compatible camera module”, the finished board costs a lot more. In conclusion, I would have to say that it is worth spending time and effort to make your own camera modules, because the experience of reverse engineering and hacking is really interesting (at least for me). This is just a starting point, as promised I will come back with useful updates in near-future!
Raspberry Pi camera
Recently I’ve received a Raspberry Pi camera board. The camera, comes with a ribbon cable already attached to it,is a small size (25mm x 20mm x 9mm) board where a fixed focus 5MP camera module is attached. Part number of the camera module (from OmniVision) is OV5647. At the heart of the OV5647 camera module is a 1/4” color CMOS QSXGA (5 megapixel) image sensor with OmniBSI ™ technology. This Raspberry Pi camera module can be used to take high definition video, as well as stills photographs. It is easy to use for novices, but has plenty to offer advanced users looking to expand the knowledge.
(raspberry pi camera)
(Camera Serial Interface)
The Raspberry Pi camera board transfers data through an extremely fast camera serial interface (CSI-2) bus directly to the system-on-chip (SoC) processor. It does this through a 15-pin ribbon cable, also known as flexible flat cable (FFC), and connects to the surface mount ZIF 15 socket in the Raspberry Pi board. As you may noted, the camera module on this official Raspberry Pi camera board is identical to the camera modules (ccd imagers) found in many mobile phones.
Luckily, most of the mobile phone cameras are not only MIPI compliant but also CSI compliant (see the first part of this article). The 15-pin Raspberry Pi CSI interface connector pinout is also included here to help you to keep proceed with your tinkering ideas. Note that, in Raspberry Pi, there are two flexible Flat Cable (FFC) connectors (S2 & S5). S2, near to the micro USB connector, is the Display Serial Interface (DSI). It allows low-level interfacing with LCDs and other displays with Raspberry Pi. It is a 15-pin surface mounted flexible flat connector, providing two data lanes, one clock lane, 3.3V and GND. S5, located between LAN and HDMI connector is the MIPI Camera Serial Interface 2 (CSI-2) connector for camera modules. It is a 15-pin surface mounted flat flexible connector, providing two data lines, one clock lane, bidirectional control interface compatible with I2C, 3.3V and GND. The data transmission interface in CSI is unidirectional differential serial interface with data and clock signals (the physical layer of this interface is the MIPI Alliance Standard for DPHY).
Arduino camera
Adding a camera to your Arduino UNO is not very difficult, because ArduCAM ™ Shield is infront of you. You can find a good tutorial on ArduCAM here: http://www.arducam.com/tutorial/. This tutorial will demonstrate how to use the ArduCAM shield on Arduino UNO board, aim the point and press a snapshot button you will get a BMP picture saved on the SD/TF card!
ArduCAM shield hardware integrates all the necessary components to interface with camera modules. User only need a extra support camera modules and a TF/SD card to start image capture. The ArduCAM shield includes a ArduChip which handle complex timing between MCU and LCD, Camera, FIFO. It exports a standard SPI serial interface and can be interfaced with wide range of microcontrollers. Further, ArduCAM shield includes two sets of pin out, identical in function. One is Arduino standard, it can be well mate with standard Arduino boards like UNO, MEGA2560, Leonardo and DUE etc. The other one is alternative port which can be connect to any platform like Raspberry Pi. After the great success of ArduCAM shield Rev.B, the ArduCAM team now released a more powerful ArduCAM shield Rev.C with amazing new features. This revision supports camera modules including OV7660, OV7670, OV7675, OV7725, OV2640, OV3640, OV5642 and MT9D111.
(Tinker Hint: 16-pin camera connector in Nokia mobile phone 7380)
Image sensor is usually cheap and you can buy them for as little as $5.00 on eBay. However, when it turn into a “microcontroller-compatible camera module”, the finished board costs a lot more. In conclusion, I would have to say that it is worth spending time and effort to make your own camera modules, because the experience of reverse engineering and hacking is really interesting (at least for me). This is just a starting point, as promised I will come back with useful updates in near-future!
